Built at Home
48 interactive build manuals with a 3D model for every step. Size the project, enter your store's lumber prices, and get a shopping list, cut list, cut diagram and instructions that match.
48 of 48 builders
Tote Rack Builder
Ladder-style rack where the tote lip hangs on 2×4 runners, so no shelves are needed.
Raised Bed Builder
Stacked 2×6 sides on 2×4 corner posts, on the ground or up on legs.
Sawhorse Builder
The first thing to build. Three-board I-beam top, splayed legs that lock into it, sacrificial cap.
Fence & Screen Builder
Posts in concrete, 2×4 rails, and your choice of vertical pickets or horizontal slats.
Deck Box Builder
Outdoor cushion and tool storage with a hinged slat lid. Bench height option.
Platform Bed Builder
Twin through Cal King. Center beam, L-legs, 1×4 or 2×4 slats, optional headboard.
Cornhole Board Builder
Regulation or tailgate size. Folding legs on carriage bolts, finish schedule included.
Garage Shelving Builder
Tote-rack ladders with plywood decks: a freestanding wall of shelves that holds paint cans, coolers and the bins nobody unpacks.
Workbench Builder
A heavy, square 2×4 bench with laminated legs, a plywood or doubled-2×4 top and a lower shelf for the stuff that ends up on the floor.
Miter Saw Station Builder
Two 2×4 wing benches with a dropped saw platform between them, so long boards ride dead level with the saw table on both sides.
Firewood Rack Builder
A face-cord rack that keeps the stack off the dirt: pressure-treated frame on pavers, braced 2×4 ends, and a steel roof if you want one.
Lumber Rack Builder
Doubled 2×4 uprights lagged into the wall studs, 5° arms bolted through them, and an offcut bin underneath for the pieces too good to burn.
Bike Rack Builder
A floor-standing wheel-slot rack: roll the front wheel in between two sloped fins until it drops behind the front rail, and the bike stands on its own.
Yard Tool Rack Builder
A slotted 2×6 rail that holds rakes, shovels and brooms upright, on the wall or on its own feet, with hooks for the hose and cords.
Trash Enclosure Builder
A picket-skinned corral that hides 1–3 roll-out carts, with a lift-up lid so the cart lids still open.
Potting Bench Builder
Slatted work surface that drains, a lower shelf for bags and pots, and a back with an upper shelf.
Planter Box Builder
Stacked cedar 2×6 boxes with a slatted, draining floor. Square or long, on the patio or up on legs.
Compost Bin Builder
Slatted 1-, 2- or 3-bay bin with front boards that lift out, so you can turn the pile without climbing in.
Outdoor Bench Builder
The classic slatted garden bench: 2×4 frame, 2×6 or 2×4 seat, with a reclined backrest or a backless seat with a shoe shelf.
Patio Sofa Builder
A boxy 2×4 outdoor sofa sized around store-bought deep-seat cushions: loveseat, 3-seat sofa, or an L-shaped sectional.
Adirondack Chair Builder
The low, reclined porch classic with wide flat arms, built from dimensional lumber with straight cuts only.
Dog Bed & Ramp Builder
A raised 2×4 bed frame sized to the cushion, plus an optional cleated ramp up to your couch or bed.
Hot Tub Steps & Surround Builder
Box-frame steps up to the tub rim, plus a framed, 2×6-clad surround on one to four sides.
Mudroom Bench Builder
An 18″ entry bench with shoe cubbies underneath and an optional tall back with hooks and a top shelf.
Console Table Builder
A narrow entry table: 2×4 legs and aprons, a glued-up 2×6 or 2×8 top, optional lower shelf.
Folding Workbench Builder
A wall-mounted bench that folds up flat against the wall: lagged ledger, hinged ply top, fold-down legs or chains.
Overhead Garage Storage Builder
A ceiling-hung 2×4 platform with a plywood deck: on-edge headers lagged to the joists, bolted 2×4 hangers, room for two rows of totes.
Rolling Tool Cart Builder
A 2×4-framed shop cart with plywood shelves, locking casters and an optional push handle.
Kayak Rack Builder
A-frame yard rack or wall-mounted arms for two to four kayaks or paddleboards, padded so the hulls don't scuff.
Tire Rack Builder
Get the off-season set off the garage floor: tires stand upright, cradled between two rails, on a wall bracket or a freestanding frame.
Garden Gate Builder
A Z-braced wood gate that stays square: picket or horizontal-slat face, sized to the opening between your posts.
Trellis Arbor Builder
A garden-path arbor: four posts set in concrete, doubled 2×6 beams with shaped ends, a slatted top and 2×2 lattice sides for climbers.
Herb Tower Builder
Stacked, bottomless cedar frames that turn a few square feet into tiers of strawberries and herbs, as a pyramid or a staircase against a fence.
Chicken Coop Builder
A raised backyard coop sized at 4 ft² per hen, with a sloped roof, outside nest boxes, a ramp and an optional framed run.
Outdoor Dining Table Builder
A farmhouse-style patio table: a gapped 2×6 top on a bolted apron frame, with chunky 4×4 or laminated 2×4 legs and an H-stretcher.
Picnic Table Builder
The classic A-frame table with attached benches: bolted legs at 30°, 2×6 top and seats.
Porch Swing Frame Builder
A freestanding A-frame for a 4′ or 5′ porch swing: 4×4 legs, doubled 2×6 beam, knee-braced both ends.
Closet Organizer Builder
A plywood shelf tower with double-hang and long-hang rods either side and a full-width top shelf.
Bookshelf & Media Console Builder
2×4 side ladders, plywood shelves and a plywood back: one design that builds a tall bookshelf or a low, wide media console.
Standing Desk Builder
A fixed-height standing desk sized to your elbows: doubled 2×4 legs, a braced apron, plywood or 2×6 top and an optional monitor shelf.
Kids' Loft Bed Builder
A twin or full loft bed with bolted rails, guard rails on all four sides, a built-in ladder and room underneath for a desk or a fort.
Pergola Builder
A freestanding pergola from 8×8 to 12×16: posts in concrete, doubled beams, 2×6 rafters with shaped tails and optional 2×2 purlins.
Bird House Builder
Species-correct nest box from a cedar board: right floor, right hole, side door for cleanout.
Wall Shelf Builder
High garage shelves on 2×4 triangle brackets: a ledger screwed to every stud, an arm and a 45° brace on every other one, plywood on top.
French Cleat Wall Builder
Rows of 45° plywood cleats screwed to the studs, with a starter set of shelves, bins and tool racks that lift off and rearrange.
Garage Wall Cabinet Builder
A wall-hung plywood cabinet with adjustable shelves and two overlay doors, screwed to the studs through hanging rails.
Sports Gear Rack Builder
A freestanding garage ball corral with a bungee front, a slotted rail for bats and sticks, and a slatted shelf for helmets and cleats.
Shoe Rack Builder
A slatted shoe rack for the garage door or the entry: 2×4 legs, 1×4 slatted shelves, an optional boot tier and a bench top to sit on.
Prices come from your price book; defaults are Home Depot DFW, Nov 2026. Every manual uses the same rules: measure before you cut, two screws per joint, and tie tall things to a wall stud.