Skip to content
Built at Home
44 · Flat-pack manual · 2×4 construction

Wall Shelf Builder

8′ × 16″ · 2 shelvestop at 6′ 6″ · 4 brackets each · 320 lb per shelf · $189.40
Loading model…
1
This stepDone
1
Step 1 of 9

Shopping list

Plain SPF studs, the straightest ones in the pile. The shelf hangs on structural screws driven into the studs: 5/16″ × 4″ goes through the 2×4 and ½″ of drywall and still puts 2″ of thread into the stud. Deck screws and drywall screws are brittle and are not a substitute.

ItemQtyEachTotal
2×4×8 stud, untreated SPF8$3.50$28.00
¾″ plywood, 4×8 sheet (BC or sanded pine) (3 rips of 15⅞″ per sheet)1$52.00$52.00
1×4×8 board (front lip)2$4.50$9.00
5/16″ × 4″ structural wood screw, washer head (GRK RSS, LedgerLOK, Simpson SDWS or equal) (2 per stud in each ledger, 2 per cleat)40$1.10$44.00
Framing angle, galvanized, about 1½″ × 2″ × 2¾″ (Simpson A23 or equal) (ties each arm to the ledger)8$1.30$10.40
#9 × 1½″ structural connector screws, box of 100 (8 per angle, 64 in all)1$11.00$11.00
#9 × 3″ construction screws, 1-lb box (about 32: brace feet and front rail)1$10.00$10.00
#9 × 2½″ construction screws, 1-lb box (about 24: braces to arms)1$10.00$10.00
#8 × 1⅝″ wood screws, 1-lb box (about 86: deck and lip)1$9.00$9.00
Construction adhesive, 10-oz tube (brace laps and lip)1$6.00$6.00
Total$189.40

Tools: stud finder, 4′ level (or a laser), miter saw or circular saw with a speed square, drill/driver with a 3/16″ bit and an impact driver for the structural screws, clamps, tape, pencil, a solid stepladder. A helper for the ledger.

Never hang this on drywall anchors, toggles or plastic plugs. Every structural screw goes into the middle of a wood stud. Metal studs, plaster over lath, or a block or concrete wall need a different fastening; don't build it from this list.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

8 boards94% yield
×20″
×20″
×11⅝″
×112⅛″
×14¼″
×130½″

1×4 × 8′

2 boards100% yield
×20″

Sheet goods

  • D Deck, ¾″ plywood: 2 × 96″ × 15⅞″

Rip sheet parts on a table saw or with a circular saw and a straightedge; most stores will make the first rips for free.

Load ratings are for the weight spread evenly along the shelf, on a sound wood-stud wall with studs 16″ on center, every structural screw in the middle of a stud. They are not for people, and not for one heavy thing parked on the front edge. Prices are per board or sheet at the price you enter.