Skip to content
Built at Home
05 · Flat-pack manual · 2×4 frame, picket skin

Deck Box Builder

48″ × 24″ × 24″8 ft³ inside · picket skin · $153.38
Loading model…
1
This stepDone
1
Step 1 of 8

Shopping list

A pressure-treated 2×4 frame skinned with cheap fence pickets. Cedar or PT for anything outdoors; untreated is fine under a covered patio.

ItemQtyEachTotal
2×4×8 PT, frame and lid cleats7$4.98$34.86
6′ dog-ear fence picket, ⅝″ × 5½″, cedar or PT17$2.98$50.66
6″ T-hinge, exterior (black or galvanized)2$6.98$13.96
Lid support stay (soft-close or friction) (holds the lid open; no slamming on fingers)1$11.98$11.98
#9 × 2½″ exterior screws, 1-lb box (about 46)1$10.98$10.98
#9 × 3″ exterior screws, 1-lb box (about 22)1$10.98$10.98
#8 × 1⅝″ exterior screws, 1-lb box (about 209: skin, floor, lid and hinges)2$9.98$19.96
Total$153.38

Tools: miter or circular saw, drill/driver, tape, speed square, clamps; a table saw or circular saw with a rip guide for the top skin row.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

7 boards81% yield
×31¾″
×211¾″
×248″

Picket × 6′

17 boards81% yield
×62⅞″
×22⅞″
×420⅜″
×120⅞″
×221⅜″
×121⅜″
×146¾″

A 2×4 frame carries the load; the skin just keeps weather out. Gaps between skin boards let it breathe, so it is a ventilated box, not a waterproof one: keep cushions in a storage bag, or staple 6-mil plastic under the lid slats, if it lives out in the rain. Pickets are ⅝″ × 5½″ dog-ear fence pickets with the dog-ear cut off.