Skip to content
Built at Home
08 · Flat-pack manual · 2×4 construction

Garage Shelving Builder

72″ × 24″ × 72″4 shelves · 14 boards · 2 sheets · $193.00
Loading model…
1
This stepDone
1
Step 1 of 9

Shopping list

Sight down every stud and reject anything bowed or twisted: uprights especially, since a crooked one throws the whole ladder out. Have the store rip the plywood into 23⅞″ strips if you don't own a track or table saw; it also fits in the car.

ItemQtyEachTotal
2×4×8′ SPF board14$3.50$49.00
¾″ plywood, 4×8 sheet (BC or sanded) (8 decks)2$52.00$104.00
#9 × 3″ construction screws, 1-lb box (about 48)1$10.00$10.00
#9 × 2½″ construction screws, 1-lb box (about 48)1$10.00$10.00
#8 × 1⅝″ wood screws, 1-lb box (about 64)1$9.00$9.00
#10 × 3½″ structural wood screws, 20-pack (top back rail into the wall studs)1$11.00$11.00
Total$193.00

Tools: miter saw or circular saw with a speed square, drill/driver with T25 bit, ⅛″ drill bit for pilots, tape, 4′ level, clamps, stud finder.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

14 boards91% yield
×65⅞″
×65⅞″
×224″

Sheet goods

  • P Shelf deck, ¾″ plywood: 8 × 30⅝″ × 23⅞″

Rip sheet parts on a table saw or with a circular saw and a straightedge; most stores will make the first rips for free.

Ladders every ≤48″ carry two long rails per shelf, screwed across the wide faces of the uprights; each plywood deck sits between the uprights on those rails, so nothing gets notched. Depth is overall, rail face to rail face. Screw the top back rail to the wall studs: a loaded shelf unit is top-heavy.