Skip to content
Built at Home
28 · Flat-pack manual · 2×4 + plywood construction

Rolling Tool Cart Builder

24 × 36″ cart34″ top · 3 shelves · 7 studs · $163.60
Loading model…
1
This stepDone
1
Step 1 of 8

Shopping list

Get casters rated for at least 100 lb each, two swivel with brakes and two fixed (or four locking swivels if you'll push it sideways a lot). Plate-mount, not stem.

ItemQtyEachTotal
2×4×8′ stud, untreated SPF7$3.50$24.50
¾″ plywood, 4×8 sheet1$52.00$52.00
3″ plate caster, locking swivel2$13.00$26.00
3″ plate caster, rigid2$9.00$18.00
¼″ × 1½″ lag screws + washers (casters)16$0.40$6.40
#9 × 3″ construction screws, 1-lb box (rail frames, end rails into legs)1$10.00$10.00
#9 × 2½″ construction screws, small box (long rails into legs, grip)1$7.00$7.00
#8 × 1¼″ wood screws, small box (shelves, top, caster pads)1$6.00$6.00
Wood glue, 8 oz1$5.00$5.00
⅜″ × 6″ hex lag screws + washers (handle)6$1.45$8.70
Total$163.60

Tools: circular saw with a straightedge, jigsaw for the leg holes, drill/driver, ¼″ and ⅜″ bits, socket set, speed square, clamps, a router or rasp to round the grip.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

6 boards97% yield
×1¼″
×32¾″
×110¼″
×11⅛″

Sheet goods

  • E Shelf, with four 3½ × 1½″ leg holes: 2 × 36″ × 24″
  • F Top: 1 × 36″ × 24″
  • G Caster pad: 4 × 5″ × 5″

Rip sheet parts on a table saw or with a circular saw and a straightedge; most stores will make the first rips for free.

Height is to the top surface, including 3″ casters (4″ mounting height; adjust the legs if yours differ). The legs pass through holes in the shelves, so the shelves sit on the rails, not on screws. Prices are per board or sheet at the price you enter.