Skip to content
Built at Home
39 · Flat-pack manual · 2×4 + plywood construction

Bookshelf & Media Console Builder

Bookshelf · 5 shelves36″ W × 72″ H × 12″ D · $184.24
Loading model…
1
This stepDone
1
Step 1 of 9

Shopping list

Pick the straightest, driest studs you can find; the posts are visible and a bowed one shows. A full bookshelf weighs a few hundred pounds. The front stretchers keep shelves from sagging into a smile.

ItemQtyEachTotal
2×4×8 stud, kiln-dried (posts, rungs, stretchers)6$3.98$23.88
¾″ × 4×8 plywood, sanded (rip to 12″)1$54.98$54.98
½″ × 4×8 plywood, sanded (back)1$39.98$39.98
#9 × 2½″ construction screws, 1-lb box (~80) (about 72)1$10.48$10.48
#8 × 1⅝″ wood screws, 100-pack (shelves, back · about 77)1$7.98$7.98
Wood glue, 8 oz1$4.98$4.98
Furniture anti-tip kit (L-bracket + wall screws)1$8.98$8.98
Stain or paint, 1 qt + poly, 1 qt1$32.98$32.98
Total$184.24

Tools: miter saw or circular saw with a speed square, straightedge guide for ripping ply, drill/driver, countersink bit, clamps, square, stud finder, 120/180 sandpaper.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

2×4 × 8′

6 boards97% yield
×4½″
×15¾″
×111⅝″

Sheet goods

  • S Shelf: 4 × 33″ × 12″
  • T Top: 1 × 36″ × 12″
  • B Back panel, ½″ ply: 1 × 72″ × 36″

Rip sheet parts on a table saw or with a circular saw and a straightedge; most stores will make the first rips for free.

Each side is a ladder: two 2×4 posts with 2×4 rungs on the inside face. Shelves sit on the rungs and a front 2×4 stretcher, so nothing is notched and nothing hangs on screws alone. A glued ½″ plywood back squares the whole thing. Anchor it to a wall stud, always.