Skip to content
Built at Home
15 · Flat-pack manual · 4×4 / 2×4 frame, picket skin

Trash Enclosure Builder

2 × 96-gal cart6′ 5¾″ wide · 52″ tall · 40″ deep · $437.46
Loading model…
1
This stepDone
1
Step 1 of 8

Shopping list

Everything here is ground-contact or close to it, so buy pressure-treated framing. Pickets are standard ⅝″ × 5½″ × 6′ dog-ears; cedar or treated pine both work. The lids take a beating from wind; the T-hinges matter more than the wood.

ItemQtyEachTotal
4×4×8′ pressure-treated (posts)6$11.98$71.88
2×4×8′ pressure-treated (rails)8$4.98$39.84
Fence picket ⅝″ × 5½″ × 6′45$2.98$134.10
#9 × 3″ exterior screws, 1-lb box (~55) (frame, about 48)1$10.98$10.98
#8 × 1⅝″ exterior screws, 1-lb box (~140) (pickets, 4 each, about 180)2$9.98$19.96
4×4 post base (ABA44-type) + ½″ × 4¼″ wedge anchor6$15.48$92.88
#9 × 1½″ structural connector screws, 100-pack (post bases)1$18.98$18.98
6″ galvanized T-hinge4$6.98$27.92
Lid stay chain kit (or 2′ of chain + 2 eye screws)2$5.48$10.96
Gate pull handle2$4.98$9.96
Total$437.46

Tools: miter or circular saw, drill/driver, impact driver, hammer drill with masonry bit (for the anchors), 4′ level, speed square, tape, clamps.

Every cut laid onto standard boards, longest first, with a ⅛″ saw kerf between pieces. Hatched space at the end of a board is offcut, and ×3 means cut three boards the same way. Use this at the saw to cut one board at a time.

4×4 × 8′

6 boards54% yield
×644″

2×4 × 8′

8 boards68% yield
×329⅞″
×331⅛″
×11¼″
×164½″

Picket × 6′

45 boards67% yield
×3321″
×1231″

Bays are sized from typical city carts: 96-gal ≈ 29″ × 35″ × 46″, 64-gal ≈ 25″ × 31″ × 42″. Measure yours before you cut. Prices are per 8′ board (per 6′ picket) at the price you enter.